The Signal Group Table

The Signal Group Table displays a list of your Signal Groups.

Tools > Signal Group Table

There are six columns in the Signal Group Table:

  1. Each line starts with the System Name and User Name of each Signal Group
  2. You may add a Comment by double clicking on that field
  3. The following column contains a Delete button for that Signal Group
  4. By unchecking the Enabled check box you can temporarily disable a particular Signal Group
  5. Finally there is an Edit button

Creating a Signal Group

To define a new Signal Group, click on the Add... button at the bottom of the Signal Group Table. This will prompt you for a Signal Group name and whatever further information is needed.

You can delete a Signal Group from the Signal Group Table by clicking one of the Delete buttons. Save a copy of your JMRI Configuration file as a backup first!

Editing an existing Signal Group

Click on one of the Edit buttons at the right of the Signal Group Table to open the Edit Signal Group window for the corresponding Signal Group. Signal Goup Edit pane

Signal Group Example - Junction Indicator

Consider the following track diagram, with 6 possible junctions off the main running line.
Signal Group
      application example track plan

The Signal facing this junction will have a Junction Indicator attached, with each possible route through the junction having it own Indication. When the Route is set for straight through, then no indicator is shown (pictured above).

If the route is set for position 1, then the position 1 indicator will be shown (pictured below).
Position
      indicator on signal

With this configuration, you would create a single Turnout Signal Head for each position, configured with both a Dark and Lunar Appearance. You can use any two combinations of colors you like, however Dark and Lunar are more suitable for this situation.

Within the Signal Group, you would then select each of the Signal Heads that are used to create the junction indicator. The logic for each Signal Head is then configured as follows:

Position 1 - Set Turnouts

IT1 set Thrown

IT2 set Thrown

Position 2 - Set Turnouts

IT1 set Thrown

IT2 set Closed

IT3 set Thrown

Position 3 - Set Turnouts

IT1 set Thrown

IT2 set Closed

IT3 set Closed

Position 4 - Set Turnouts

IT1 set Closed

IT4 set Thrown

IT5 set Thrown

Position 5 - Set Turnouts

IT1 set Closed

IT4 set Thrown

IT5 set Closed

IT6 set Thrown

Position 6 - Set Turnouts

IT1 set Closed

IT4 set Thrown

IT5 set Closed

IT6 set Closed

Back to the Signal Groups help page.